Coșul meu
PLA+

PLA+

65.00 Lei

Selectează culoarea

În stoc ( disponibile)

Descriere

Superior Toughness: Enhanced hardness and impact resistance Sleek Finish: Smooth surface with minimal layer lines for high User - Friendly: Eco - friendly, wide printer compatibility, and easy to print with precise dimensions

Livrare gratuită la comenzi peste 250 Lei

Politică de returnare 30 de zile

Procesare comenzi securizată

Descriere detaliată

Product specifications

   
   
   

PLA-plus-Filament-

PLA+ Filament - 1.75mm±0.03mm (1kg)

$27.99

 



ERYONE High speed PLA+ 3D Printer Filament, Reviewed by John Aldred

 

Feature：

  • Environmentally-friendly, no odor, nontoxic.
  • High intensity, bright and clear color.
  • Low shrinking percentage and hardly curl.
  • Suitable for 99% common-used FDM 3D printers.

Specifications：

  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing Temperature: 190°C-220°C
  • Heated Bed Temperature: 55-70°C
  • Printing Speed: 30-100mm/s

Showcase:

FAQ     

1.Q: Can PLA be used to print tableware?

A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.

2.Q: The nozzle is clogged by PLA, and how can I solve it?

  A:  Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.

3.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it?

  A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value.  

      The retracting parameters are improper, so adjust the retracting length and speed.  

4.Q: There are too much melted filament around the nozzle. What should I do?

  A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.

5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?

A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.

6.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why?

  A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.

7.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?

A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.

PLA-plus-Filament

Good toughness and resistance tensile performance

Compared with general PLA, the toughness and impact strength of ERYONE PLA Plus is significantly enhanced.

PLA-plus-Filament

Print Temperature Range & Diameter

200~230℃. Tight tolerances (+/-0.03mm) and dimensional accuracy (1.75mm) ensure smooth feeding of ERYONE PLA+ during the printing process.

PLA-plus-Filament

High Quality

No bubble or dust inside, neatly rolled to reduce clog or tangling.The impurity-free filament formula makes ERYONE PLA Plus have stronger adhesion and lower shrinkage.

PLA-plus-Filament

Product Information

N.W: 1kg, G.W: 1.35kg, spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.